Type any name representing your ISP (no
spaces). Enter the phone number to dial to get your Internet connection. Finally, enter
the username and then the password that was provided to you by the ISP for this Internet
account.
Enter tty device name for modem (ttyS0, etc)[ttyS0]: ttyS0
Enter ttyS0??™s port speed (115200, 57600, etc)[115200]: 115200
Enter modem init string (Enter = ATZ): ATZ
Enter name of ISP (no whitespace)[isp]: att
Enter phone number to dial: 5551212
Enter username: jsmith
Enter password: tkN0stf
12. Type n to not send clear-text passwords during login. You may need to change this to y if
your ISP requires CHAP or PAP authentication.
If you enable this, your password will be sent in clear
text over the line. Say yes here only if despite having
verified everything, you still cannot connect to your ISP.
Login during chat? [y/n]: n
13. Because this example firewall will provide IP addresses to the other computers on the
LAN, it needs to be enabled as a DHCP server (y). Then you list the range of addresses it
can assign to those computers. If you plan to have 100 or fewer computers on your LAN,
the address range in this example should work fine for you:
Do you want to enable the coyote DHCP server? [y/n]: y
Enter DHCP range starting IP [192.
Pages:
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949