/makefloppy.sh
Coyote floppy builder script v2.9
Please choose the desired capacity for the created floppy:
1) 1.44Mb (Safest and most reliable but may lack space needed
for some options)
2) 1.68Mb (Good reliability with extra space) - recommended
3) 1.72Mb (Most space but may not work on all systems or with
all diskettes)
4. Choose the capacity of your floppy disk. I used 3 (1.72MB) and it worked fine. With an
older floppy drive, you may have to use a lower capacity, which will include fewer features.
Enter selection: 3
Please select the type of Internet connection that your
system uses.
1) Standard Ethernet Connection
2) PPP over Ethernet Connection
3) PPP Dialup Connection
ISP LAN
Dial-up
modem
192.168.0.3
Phone line
Coyote Linux
floppy firewall
192.168.0.1
Ethernet
card
192.168.0.100
192.168.0.101
192.168.0.102
483
Running a Linux Firewall/Router 18
5. This example uses a PPP dial-up connection here, so type 3:
Enter Selection: 3
.
.
.
By default, Coyote uses the following settings
for the local network interface:
IP Address: 192.168.0.1
Netmask: 255.255.255.0
Broadcast: 192.168.0.255
Network: 192.168.0.0
If you have a broadband (DSL, cable modem, or other Ethernet) connection to the
Internet, you would typically select 1 here.
Pages:
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946