0.0.10): icmp_seq=9 ttl=255 time=0.365 ms
64 bytes from butch (10.0.0.10): icmp_seq=10 ttl=255 time=0.367 ms
--- butch statistics ---
10 packets transmitted, 10 packets received, 0% packet loss, time 9011ms
rtt min/avg/max/mdev = 0.351/0.402/0.457/0.042 ms
A line of output is printed each time a packet is sent and received in return. It shows how
much data was sent and how long it took for each package to be received. Watch this for
a while, and then press Ctrl+C to stop ping. You??™ll see statistics on how many packets
were transmitted, received, and lost.
194
Running the Show Part II
If the output doesn??™t show that packets have been received, there??™s no contact with the
other computer. Verify that the names and addresses of the computers that you want to
reach are in your /etc/hosts file or that your DNS server is accessible. Next, confirm
that the names and IP addresses you have for the other computers you are trying to reach
are correct (the IP addresses are the most critical).
5. If you are able to reach an IP address on your LAN with ping, but are unable to ping a
host computer by name, you may not be communicating with your DNS server. Repeat
the ping command with the IP address of your DNS server to see if it is up and that you
are able to communicate with it.
Pages:
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434