52.227-19 and subparagraph
(1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IS-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
Copyright 1986-2003 by Cisco Systems, Inc.
Compiled Mon 18-Aug-03 19:03 by dchih
Image text-base: 0x60008950, data-base: 0x61B3E000 hit CTRL-BREAK sequence here
PASSWORD RECOVERY IS DISABLED
Do you want to reset the router to factory default
configuration and proceed [y/n] ? y
Reset router configuration to factory default.
Cisco 3640 (R4700) processor (revision 0x00) with 59392K/6144K bytes of memory.
Processor board ID 09196037
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
2 Ethernet/IEEE 802.3 interface(s)
2 Voice FXO interface(s)
2 Voice FXS interface(s)
DRAM configuration is 64 bits wide with parity enabled.
125K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
8192K bytes of processor board PCMCIA Slot0 flash (Read/Write)
20480K bytes of processor board PCMCIA Slot1 flash (Read/Write)
[OK][OK]
SETUP: new interface Ethernet0/0 placed in "shutdown" state
SETUP: new interface Ethernet1/0 placed in "shutdown" state
Press RETURN to get started!
Router>
Note
Use the following link for standard break-key sequence combinations for most applications, operating systems, and
platforms, and to get some tips on how to troubleshoot related problems: http://www.
Pages:
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124