16.0.0 with the EIGRP routing process
network 10.0.0.0 Associates network 10.0.0.0 with the EIGRP routing process
C
EIGRP will advertise
network 172.16.0.0.
B
EIGRP will advertise
network 172.16.0.0.
172.16.5.0
255.255.255.0
192.168.14.16
255.255.255.240
172.16.6.0
255.255.255.0
A
176 Chapter 5: Implementing EIGRP
Figure 5-5 Disabling Autosummarization Corrects Problem
After you enable EIGRP, various commands can be used to display information about how the
protocol is operating. The show ip route eigrp command displays the current EIGRP entries in
the routing table.
The show ip protocols command displays the parameters and current state of the active routing
protocol process. This command shows the EIGRP AS number. It also displays ?¬?ltering and
redistribution numbers and neighbor and distance information. This also shows the networks that
are currently being advertised on the router by the protocol.
Use the show ip eigrp interfaces [type number] [as-number] command to determine on which
interfaces EIGRP is active, and to learn information about EIGRP that relates to those interfaces.
If you specify an interface by using the type number option, only that interface is displayed.
Pages:
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274