168.254.202, Mask 255.255.255.0, Area 0.0.0.0
AS 201, Router ID 192.168.99.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State OTHER, Priority 1
Designated Router id 192.168.254.10, Interface address 192.168.254.10
Backup Designated router id 192.168.254.28, Interface addr 192.168.254.28
Timer intervals configured, Hello 10, Dead 60, Wait 40, Retransmit 5
Hello due in 0:00:05
Neighbor Count is 8, Adjacent neighbor count is 2
Adjacent with neighbor 192.168.254.28 (Backup Designated Router)
Adjacent with neighbor 192.168.254.10 (Designated Router)
Table 4-3 show ip ospf interface Output
Field Description
Ethernet Status of physical link and operational status of protocol
Internet Address Interface IP address, subnet mask, and area address
AS Autonomous system number (OSPF process ID), router ID, network
type, link-state cost
Transmit Delay Transmit delay, interface state, and router priority
Designated Router Designated router ID and respective interface IP address
Backup Designated Router Backup designated router ID and respective interface IP address
Timer Intervals Con?¬?gured Con?¬?guration of timer intervals
Hello Number of seconds until the next hello packet is sent out of this
interface
Neighbor Count Count of network neighbors and list of adjacent neighbors
Introducing OSPF 151
For more speci?¬?c information about a given neighbor, use the same command, but specify the
address of a given neighbor.
Pages:
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240