This command also displays OSPF
timer settings and other statistics, including the number of times the SPF algorithm has been
executed. In addition, this command has optional parameters so you can further specify the
information that is to be displayed.
Value Description
E2
IA
This ?¬?eld indicates the type of route. It can be one of the following values:
*: Indicates the last path used when a packet was forwarded. It pertains only to
the nonfast-switched packets. However, it does not indicate which path will be
used next when forwarding a nonfast-switched packet, except when the paths
are equal cost.
IA: OSPF interarea route
E1: OSPF external type 1 route
E2: OSPF external type 2 route (The value displayed in the example.)
L1: IS-IS level 1 route
L2: IS-IS level 2 route
N1: OSPF NSSA external type 1 route
N2: OSPF NSSA external type 2 route
172.150.0.0 This address indicates the address of the remote network.
[110/5] The ?¬?rst number in the brackets is the administrative distance of the information
source; the second number is the metric for the route.
via 10.119.254.6 This value speci?¬?es the address of the next router to the remote network.
Pages:
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237