name vlan-name (Optional) Specify the VLAN name, an ASCII string from 1 to 32
characters that must be unique within the administrative domain.
Example 2-1 Verifying Trunk Con?¬?guration, Parameters, and Port VLAN Information (Continued)
36 Chapter 2: Medium-Sized Switched Network Construction
By default, a switch is in VTP server mode so that you can add, change, or delete VLANs.
If the switch is set to VTP client mode, you cannot add, change, or delete VLANs.
Use the vlan global con?¬?guration command to create a VLAN and enter VLAN
con?¬?guration mode:
SwitchX# ccoonnffiigguurree tteerrmmiinnaall
SwitchX(config)# vvllaann 22
SwitchX(config-vlan)# nnaammee sswwiittcchhllaabb9999
Use the no form of this command to delete the VLAN.
To add a VLAN to the VLAN database, assign a number and name to the VLAN. VLAN 1
is the factory default VLAN. Normal-range VLANs are identi?¬?ed with a number between
1 and 1001. VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI
VLANs. If the switch is in VTP server or VTP transparent mode, you can add, modify, or
remove con?¬?gurations for VLAN 2 to 1001 in the VLAN database. (VIDs 1 and 1002 to
1005 are automatically created and cannot be removed.
Pages:
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75