By default, the domain name is not set.
You can set a password for the VTP management domain. However, if you do not assign
the same password for each switch in the domain, VTP does not function properly.
VTP pruning eligibility is one VLAN parameter that the VTP protocol advertises. Enabling
or disabling VTP pruning on a VTP server propagates the change throughout the
management domain.
Use the vtp global con?¬?guration command to modify the VTP con?¬?guration, domain name,
interface, and mode:
SwitchX# ccoonnffiigguurree tteerrmmiinnaall
SwitchX(config)# vvttpp mmooddee [ sseerrvveerr | cclliieenntt | ttrraannssppaarreenntt ]
SwitchX(config)# vvttpp ddoommaaiinn domain-name
SwitchX(config)# vvttpp ppaasssswwoorrdd password
SwitchX(config)# vvttpp pprruunniinngg
SwitchX(config)# eenndd
Use the no form of this command to remove the ?¬?lename or to return to the default settings.
When the VTP mode is transparent, you can save the VTP con?¬?guration in the switch
con?¬?guration ?¬?le by entering the copy running-con?¬?g startup-con?¬?g privileged EXEC
command.
Example: VTP Configuration
Example 2-1 demonstrates the commands that you would enter to con?¬?gure VTP and
display VTP status.
Pages:
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68