Press the Tab key until OK is highlighted.
Press the Enter key.
21. Press the Tab key to highlight the Yes button. Press the Enter key to
remove all Linux partitions.
Preparation 45
22. Accept the default Use GRUB Boot Loader. Press the Tab key to highlight
the OK button. Press the Enter key.
23. On the Boot Loader special options screen, press the Tab key to
highlight the OK button. Press the Enter key.
46 Practical Hacking Techniques and Countermeasures
24. Leave the Boot Loader Password blank for this installation. Press the
Tab key to highlight the OK key. Press the Enter key.
*Note: If you decide to use a Boot Loader Password, remember that all of Linux is
case sensitive.
25. On the default Boot Partition screen, press the Tab key to highlight
the OK button. Press the Enter key.
Preparation 47
26. On the Boot Loader install location screen, press the Tab key to
highlight the OK button. Press the Enter key.
27. On the Network Configuration for eth0 screen you will need to
decide whether to assign a static IP address or obtain an IP from a
DHCP source. In this example, I left the default of dhcp. Press the Tab
key to highlight the OK button. Press the Enter key.
48 Practical Hacking Techniques and Countermeasures
28. On the Firewall Configuration screen, press the Tab key to highlight
No Firewall. Press the Tab key to highlight the OK button. Press the
Enter key on OK.
29. On the Language Support screen, press the Tab key to select any
additional languages you need support for.
Pages:
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42