Follow these steps:
Press DOWN ARROW twice to move the highlight down to the CD-ROM
Drive item.
Press + twice to move the CD-ROM Drive item up to the top of the list,
as shown here:
Press F10 to invoke the Save And Exit
command. The BIOS displays this
Setup Confirmation screen.
Make sure the black highlight is on
the Yes button. (It should be there by
default.) If not, press TAB to move it
there.
Press ENTER to ???click??? the Yes button. Your PC restarts. This time, it boots
from the optical drive if that drive contains a bootable disk.
Set an AMIBIOS PC to Boot from the Optical Drive
To set an AMIBIOS-based PC to boot from the optical drive, follow these steps:
Access the BIOS. For example, start your PC, and then press DELETE when
the BIOS prompts you. The BIOS Setup Utility screen appears, as shown in
Figure 6-3 (earlier in this project).
Press RIGHT ARROW three times (moving the gray highlight along the top row
under ???BIOS Setup Utility???) to select the Boot tab:
With the Boot Device Priority item selected, press ENTER to open the Boot
screen.
4.
?—?
?—?
5.
6.
7.
1.
2.
3.
60 Part II: Intermediate
With the 1st Boot Device item selected, press ENTER to open the menu of boot
devices:
Press DOWN ARROW to select the CDROM item, and then press ENTER to make
that item the 1st Boot Device and to close the menu. The BIOS moves the
Floppy Drive item down the list to the 2nd Boot Device:
Press F10 to invoke the Save And Exit command.
Pages:
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94